The installation takes about 40 minutes, it’s mostly automated so once started it can be allowed to complete unattended.

1. Warning: All data on the console will be wiped, this includes show files so please save any shows to a memory stick before proceeding.
2. Power off the Tiger Touch.
3. Ensure the memory stick is plugged in.
4. Start up console pressing Delete button to enter the BIOS.
5. When prompted, type in the password “68340”, to enter the BIOS.
6. Once in the BIOS, press down arrow once then Enter button to open the second menu.
7. Press down arrow once then Enter button to open the second menu.
8. Press the blue Copy/Move/Link button repeatedly until “USB-HDD0” is in position 1.
9. Press the Speed button (on the Attribute Bank buttons) then Enter, to save changes.
10. When the console restarts it will boot automatically into the memory stick.

Once the recovery environment has loaded, please follow the on-screen instructions to complete the installation.

If you require any further information please refer to section 12.7 of the manual. A copy of the manual can be found online at the following address: http://support.avolites.com/Support/Consoles/TigerTouch.aspx